Bathroom with an LED vanity light above the mirror at 3000K

How to Choose a Bathroom Vanity Light: Size, Height and Colour Temperature

Mount a bathroom vanity light so its centre sits about 65 to 70 inches above the floor, and choose a fixture roughly one-half to three-quarters the width of the mirror. Use 2700K to 3000K with a high CRI for flattering skin tones, and aim for about 70 to 80 lumens per square foot at the vanity.

How wide should a vanity light be?

A common rule of thumb is a fixture that is at least one-half and no more than three-quarters of the vanity or mirror width. A 36-inch mirror typically pairs with an 18 to 27 inch bar. Fixtures that are too wide can crowd the mirror edges, and fixtures that are too narrow leave the face unevenly lit.

For wide double vanities, use two separate lights, one above each sink, instead of a single long bar. This usually gives each person even light.

How high should I mount a bathroom vanity light?

The usual range is 65 to 70 inches from the floor to the centre of the fixture, or about 75 to 80 inches for a bar mounted above a mirror. Adjust for the tallest user. Always follow the installation instructions that come with the fixture.

Layout Typical placement Best for
Bar above mirror 3 to 6 inches above the mirror frame, or 75 to 80 in. to centre Single mirrors and tight spaces
Two side lights About 60 to 66 in. to centre, 28 to 40 in. apart Even, shadow-free face lighting
Integrated LED mirror Built into the mirror Modern or compact bathrooms

What colour temperature is best for vanity lights?

Most bathrooms look best between 2700K and 4000K. Warm white at 2700K to 3000K feels relaxed and complements wood and brass finishes. Neutral white at 3500K to 4000K looks crisper and is popular for grooming and makeup.

Colour rendering index (CRI) describes how accurately colours appear. A CRI of 90 or higher is typically recommended for mirrors, so skin tones and makeup look natural. Use the same colour temperature on the ceiling lights and the vanity so the room looks consistent.

How much light do I need at the vanity?

For grooming tasks, a common guide is about 70 to 80 lumens per square foot in the vanity area. A typical single-sink vanity area is small, so a fixture around 800 to 1,600 lumens in total is a typical planning range. Lighting from both sides or above and below the face reduces shadows under the eyes and chin.

  • Side lighting is typically the most even for faces.
  • Overhead-only lighting can create shadows.
  • Dimmable fixtures help adjust for night use.

What rating does a bathroom light need?

Bathroom fixtures are exposed to humidity. Look for a damp-rated fixture near sinks and a wet-rated fixture where water can splash directly, such as in or near a shower. Check the installation zones in your local code and ask your inspector if you are unsure.

Browse our LED vanity lights for fixtures designed for mirror and vanity use. For other rooms, compare indoor wall lights and LED slim pot lights for general ceiling light. You can also see our brand ranges from Dainolite.

What finish and style should I pick?

Choose a finish that matches your faucets, cabinet hardware and mirror frame. Matte black, brushed nickel, chrome and brass are common choices. Frosted or opal diffusers soften the light and reduce glare, while clear glass gives a sparkling look but can be harsher on the eyes.

What mistakes should I avoid with vanity lighting?

The biggest mistake is relying on a single overhead light. It casts shadows downward across the face and makes grooming harder.

  • Mounting the fixture too low, where it causes glare in the mirror.
  • Mixing different colour temperatures between the vanity and the ceiling.
  • Choosing a fixture without a damp rating for a steamy bathroom.
  • Forgetting a dimmer for comfortable late-night use.

Plan the rough-in positions before the drywall goes up, so junction boxes line up with the mirror and vanity.

Where can I buy vanity lights in Edmonton?

LitesGo supplies lighting to homeowners, contractors and builders from 4914 89 St NW, Edmonton, AB. In-stock items usually dispatch in 1-2 business days and we ship anywhere in Canada. Contractors can apply for Net 30 terms, subject to approval. Shipping terms vary by brand, so see our shipping policy. Read more about LED lighting in Edmonton.

Frequently asked questions

How high should a vanity light be above a mirror?

A common guide is to mount a bar light about 75 to 80 inches from the floor to its centre, or 3 to 6 inches above the mirror frame, adjusted for the tallest user.

What size vanity light do I need?

Typically choose a fixture one-half to three-quarters the width of the mirror or vanity. A 36-inch mirror usually pairs with an 18 to 27 inch bar.

What colour temperature should a bathroom vanity light be?

Most bathrooms use 2700K to 4000K. 3000K is a common middle choice, and 3500K to 4000K looks crisper for grooming.

Should I use one light or two for a double vanity?

A common approach is one light above each sink, which tends to give each person even, shadow-free light.

Do bathroom vanity lights need a damp or wet rating?

Fixtures near sinks are typically damp-rated, and fixtures where water can splash directly typically need a wet rating. Check your local code and inspector.

Need help choosing? Contact the LitesGo team or call (587) 701-5969.