For most drop ceilings, a back-lit LED flat panel gives a clean, even, low-profile look, while a troffer is a deeper fixture with a lens or centre basket that can add more visual depth and glare control. Both fit standard ceiling grids. Choose by appearance, ceiling depth, and whether you are replacing fluorescent troffers or building new.
What is the difference between an LED flat panel and a troffer?
A flat panel is a thin fixture with LEDs behind a diffuser, so the whole face glows evenly. A troffer is a recessed fixture, traditionally built around fluorescent tubes, that uses a lens or reflector to spread the light. LED troffers keep the same familiar shape but use LED sources.
In practice the two overlap. Both drop into a T-bar grid, both come in the same nominal sizes, and both are used in offices, schools, clinics and retail. The differences are mostly in depth, look and how the light is controlled.
How do back-lit panels, centre-basket troffers and lensed troffers compare?
| Type |
Look |
Best for |
| Back-lit flat panel |
Thin, flat, evenly lit face |
Modern offices, corridors, clean ceilings, shallow plenums |
| Centre-basket troffer |
Recessed centre section that adds depth |
Replacing older fluorescent troffers, general office and classroom use |
| Lensed troffer |
Patterned lens that diffuses and hides the source |
Spaces where a traditional troffer appearance is expected |
Browse the full LED panels and troffers collection to compare styles, or go straight to our LED troffer lights.
Which size should you choose: 1x4, 2x2 or 2x4?
Match the size to the existing ceiling grid. Changing grid size means changing ceiling tile, so most projects keep the opening they already have.
-
2x4 LED flat panels are the most common choice for offices, schools and open areas, and the usual replacement for a 2x4 fluorescent troffer.
-
2x2 LED flat panels suit smaller rooms, reception areas and ceilings that use 2x2 tile.
-
1x4 LED flat panels fit narrow grids, corridors and rooms that use a 1x4 layout.
The nominal size names the grid opening. Check the actual fixture dimensions and depth on the product page, especially if the plenum space above the ceiling is tight.
Can you install panels in a T-bar or drywall ceiling?
In a T-bar grid, a panel or troffer simply drops into the opening and rests on the grid, with wiring connected above. Drywall and solid ceilings need a different approach.
- Recessed in drywall: some panels can be installed with a frame or mounting kit made for that purpose.
- Surface mounted: a surface kit lets a panel mount on the ceiling face where there is no space or access above.
- Suspended: some projects hang panels on cables, which needs a suitable kit.
Frames, surface kits and related parts are listed under LED panel and troffer accessories. Confirm that the kit matches the fixture size and model before ordering.
What are selectable wattage and CCT, and are they worth it?
Selectable wattage lets one fixture run at several power levels, and selectable CCT lets you choose the colour temperature, for example warmer or cooler white, with a switch on the fixture. Many LED panels offer one or both. Check the product page for the exact options on each model.
For contractors the benefit is flexibility. One SKU on the shelf covers several lumen levels and tones, you can match adjoining rooms, and you can adjust on site if the client changes their mind. Pick one wattage and one CCT per space so the ceiling looks consistent.
Can LED panels use sensors and dimming?
Many panels and troffers support 0-10V dimming, and some products work with occupancy or daylight sensors. Support varies by model, so confirm the dimming type and sensor compatibility on the product page. Also check the driver voltage range, since many Canadian commercial buildings use 347V.
Keep the dimmer or control type consistent across a room and check the driver and control compatibility before you order. If you are unsure about a control system, ask your supplier before you buy.
How do you replace a fluorescent troffer with LED?
The simplest approach is to replace the whole fixture with an LED panel or LED troffer of the same nominal size. This removes the old ballast, which is the part that most often fails, and gives you a new driver and a warranted fixture.
- Count the fixtures and confirm the grid size, 2x4, 2x2 or 1x4.
- Check the circuit voltage, 120V, 277V or 347V, and choose a matching driver.
- Measure plenum depth and compare it with the new fixture depth.
- Choose wattage and CCT, or a selectable model, for each space.
- Check the Canadian Electrical Code and your local authority having jurisdiction (inspector) for permit and wiring requirements.
For larger jobs, see our commercial lighting supply in Edmonton. Contractor accounts with Net 30 terms are available, subject to approval.
Frequently asked questions
Is an LED flat panel better than a troffer?
Neither is better in every case. A flat panel has a thin, even look, and a troffer has more depth and a traditional appearance. Choose by ceiling depth, the look you want and the existing fixtures.
What size LED panel replaces a 2x4 fluorescent troffer?
A 2x4 LED flat panel or 2x4 LED troffer replaces a 2x4 fluorescent troffer in the same grid opening. Check the fixture depth and the plenum space before ordering.
Can I install an LED panel in a drywall ceiling?
Yes, with the right mounting. Use a frame kit for a recessed look or a surface kit to mount on the ceiling face. Check that the kit matches the panel size and model.
Can LED panels be dimmed?
Many can, most often with a 0-10V dimming input. Not every model supports dimming, so check the product page for the dimming type and compatible controls.
What does selectable CCT mean on an LED panel?
It means you can choose the colour temperature, for example warm white or cool white, with a switch on the fixture. This lets one product match different rooms and client preferences.
Need help choosing panels for a project? Contact the LitesGo team or call (587) 701-5969. We are at 4914 89 St NW, Edmonton, AB T6E 5K1, and in-stock items usually dispatch in 1-2 business days anywhere in Canada.