Choosing the right UFO high bay involves more than selecting a wattage or lumen output. Beam angle also affects how the light reaches the floor, how evenly fixtures overlap and how much of the available light is directed into the intended area.
Two fixtures can produce a similar number of lumens but create noticeably different results if one has a 90° beam angle and the other has a 120° beam angle. Some UFO high bays also offer selectable beam angles, allowing the light distribution to be adjusted to suit the project.
This guide explains the practical differences between 90°, 120° and adjustable beam angles—and how ceiling height, fixture spacing and space layout can influence the right choice.
What Is a Beam Angle?
A beam angle describes how widely a light fixture distributes its light.
A narrower beam directs more of the fixture’s output toward a concentrated area. A wider beam spreads the output across a larger area.
Beam angle does not represent a hard edge where the light suddenly stops. Light continues beyond the stated angle at a lower intensity. However, the beam angle is still a useful way to compare the overall distribution produced by different fixtures.
In practical terms:
-
A narrower beam generally produces a more concentrated pattern.
-
A wider beam generally covers a larger area.
-
The same beam becomes wider as the mounting height increases.
-
The final result also depends on lumen output, fixture spacing, ceiling height and the shape of the space.
90° vs 120° Beam Angle: What Is the Main Difference?
The main difference is how concentrated or widely distributed the light is.
A 90° UFO high bay directs more light downward into a smaller area. A 120° model distributes light more broadly, allowing adjacent fixtures to overlap across a wider area.
Assuming the fixtures have similar lumen output:
| Feature |
90° Beam Angle |
120° Beam Angle |
| Light distribution |
More concentrated |
Wider spread |
| Peak intensity |
Generally higher |
Generally lower |
| Coverage from one fixture |
Smaller, more focused area |
Larger area |
| Typical mounting conditions |
Higher mounting or more targeted coverage |
Lower or moderate mounting with broad coverage |
| Common applications |
Warehouses, workshops, aisles and defined work areas |
Open floors, gyms and wide unobstructed spaces |
| Main consideration |
May require closer or more carefully planned spacing |
May provide less intensity at the work surface when mounted too high |
Neither beam angle is automatically better. The correct choice depends on where the fixtures will be installed and what the lighting needs to accomplish.
When Should You Choose a 90° UFO High Bay?
A 90° beam angle is often suitable when the project requires more focused downward illumination.
Because the light is distributed across a narrower area, more of the output can be directed toward the floor or work surface instead of spreading toward walls and surrounding areas.
A 90° UFO high bay may be appropriate for:
-
Warehouses with higher mounting heights
-
Workshops and manufacturing facilities
-
Narrower aisles or defined work zones
-
Areas where stronger illumination is needed directly below each fixture
-
Projects where excessive light spill should be reduced
-
Layouts with relatively close or carefully planned fixture spacing
For example, a warehouse with tall ceilings and clearly defined working areas may benefit from a 90° distribution because the light remains more concentrated as it travels toward the floor.
However, a narrower beam can also create visible bright and dark areas if the fixtures are spaced too far apart. Fixture spacing therefore remains important.
Shop 90° UFO High Bay Lights
When Should You Choose a 120° UFO High Bay?
A 120° beam angle spreads light across a wider area.
This can help create broader coverage and smoother overlap between fixtures, particularly in open spaces without tall shelving or other obstructions.
A 120° UFO high bay may be appropriate for:
-
Open warehouses and production floors
-
Gyms and recreational facilities
-
Retail or multipurpose commercial spaces
-
Lower or moderate mounting heights
-
Wide, unobstructed layouts
-
Projects where uniform coverage is more important than concentrated intensity
Because the light is distributed over a larger area, a 120° fixture may help reduce noticeable gaps between fixtures. It can also be useful where fewer mounting points are available and wider coverage is needed from each location.
However, wider distribution does not automatically mean that fewer fixtures will always be required. If a 120° fixture is mounted too high, its light may be spread too widely to provide the required illumination at floor level.
Shop 120° UFO High Bay Lights
What Is an Adjustable Beam Angle UFO High Bay?
An adjustable beam angle UFO high bay allows the installer to select from several light distributions instead of committing to one fixed beam.
LitesGo’s Votatec adjustable UFO high bays provide three selectable settings:
-
60°: The most concentrated option
-
80°: A balance between concentration and coverage
-
100°: The widest available setting on these models
This flexibility can be valuable when the final mounting conditions are not fully known when the fixtures are ordered.
An adjustable beam angle may be useful for:
-
Retrofit projects with uncertain mounting heights
-
Buildings containing several zones with different layouts
-
Projects where fixture spacing cannot be changed
-
Contractors supplying fixtures before the final layout is confirmed
-
Facilities that want one fixture type for multiple applications
-
Sites where the lighting distribution needs to be fine-tuned during installation or commissioning
For example, the same adjustable UFO high bay could be set to a narrower distribution in a tall storage area and a wider distribution in an open production area.
This can also simplify product selection and inventory. Instead of ordering separate fixed-beam models for different parts of a project, one adjustable model may cover several requirements.
Beam angle selection should be completed according to the product instructions and project requirements. It should not be treated as a replacement for a proper lighting layout.
Shop 60° / 80° / 100° Adjustable UFO High Bays
90° vs 120° vs Adjustable: Quick Comparison
| Option |
Main advantage |
Best suited for |
Important consideration |
| 90° fixed beam |
More focused downward distribution |
Higher mounting, defined work areas and warehouse applications |
Spacing must prevent dark areas between fixtures |
| 120° fixed beam |
Wider coverage and smoother overlap |
Open spaces and lower or moderate mounting heights |
Output may become too widely distributed at greater heights |
| 60° / 80° / 100° adjustable |
On-site flexibility |
Mixed-use spaces, retrofits and projects with uncertain layouts |
The selected setting still needs to match the lighting plan |
How Ceiling Height Affects Beam Angle
Mounting height changes the size of the illuminated area.
As a fixture is mounted higher, its beam covers a larger area before reaching the floor. At the same time, the light level at the work surface generally decreases because the output is travelling farther and spreading across a larger area.
This is why a narrower beam is often considered for taller mounting heights. It can help keep more of the light directed toward the intended area.
A wider beam is often considered for lower mounting heights because it can expand the coverage and improve overlap without requiring the fixture to be mounted as high.
These are general guidelines rather than fixed rules. A high-output fixture with a wider beam may still perform well at greater heights, while a lower-output fixture with a narrow beam may not provide sufficient light. The complete photometric performance of the fixture must be considered.
How Fixture Spacing Affects Beam Angle
Fixture spacing determines how the beams overlap.
If fixtures with narrow beams are placed too far apart, the layout may produce bright areas directly below the fixtures and darker areas between them.
If fixtures with very wide beams are placed too close together, excessive overlap may create unnecessary brightness or uneven energy use.
When reviewing fixture spacing, consider:
-
Distance between fixtures
-
Distance from fixtures to walls
-
Mounting height
-
Required light level
-
Location of aisles, racks and equipment
-
Existing electrical and mounting points
-
Whether the space contains multiple working zones
A successful layout should provide adequate illumination without creating excessive hot spots, glare or dark areas.
Other Factors to Consider
Beam angle is only one part of selecting a UFO high bay. Before choosing a fixture, also review the following:
Lumen Output
Lumens indicate how much visible light the fixture produces. Two fixtures with the same beam angle may perform very differently if their lumen outputs are not comparable.
Wattage and Efficacy
Wattage represents energy consumption, while efficacy—measured in lumens per watt—shows how efficiently the fixture converts power into visible light.
Mounting Height
Higher ceilings generally require more output or a more carefully controlled distribution to deliver sufficient illumination to the work surface.
Space Layout
Tall racks, machinery, partitions and storage systems can block or redirect light. An open gym and a high-rack warehouse may require different distributions even when their ceiling heights are similar.
Required Light Level
Different tasks require different levels of illumination. General storage, detailed manufacturing work, vehicle service and recreational use should not automatically use the same layout.
Surface Reflectance
Light-coloured ceilings and walls reflect more light than dark surfaces. A facility with dark ceilings, racks or floors may require additional output or different fixture spacing.
Glare and Visual Comfort
A high-output fixture can still produce an uncomfortable environment if it creates excessive glare. Beam angle, mounting position and fixture optics all affect visual comfort.
Which Beam Angle Should You Choose?
As a general starting point:
-
Choose 90° when you need more focused downward illumination.
-
Choose 120° when you need broader coverage across an open area.
-
Choose an adjustable beam angle when the mounting conditions vary or the final distribution needs to be selected on site.
If the project has a straightforward layout and the correct distribution is already known, a fixed-beam fixture may be the simplest choice.
If the building contains different ceiling heights, changing layouts or uncertain spacing, an adjustable model may provide greater flexibility.
For larger commercial and industrial projects, the most reliable approach is to review the fixture photometric data and prepare a lighting simulation. This can estimate light levels and uniformity before fixtures are ordered and installed.
Need Help Selecting the Right UFO High Bay?
Send us your ceiling height, fixture spacing, room dimensions and project requirements. The LitesGo team can help compare beam angles, wattage ranges and fixture options for your application.
We also offer free lighting simulations for qualifying projects to help determine fixture quantity, placement and expected light levels.
Browse All UFO High Bay Lights
Request a Project Quote