Under Cabinet Lighting Guide: LED Strip vs Puck vs Bar Lights

For most kitchens, an LED strip gives the most even under cabinet lighting, with no bright spots on the counter. Pucks suit accent lighting and retrofit jobs, while bar lights are easy to install and link together. Choose 2700K to 3000K for a warm kitchen, or 3500K to 4000K for a brighter work surface.

What is the best type of under cabinet lighting?

There is no single best type. The right choice depends on how the light will look on the counter, how easy it is to install, and whether you are renovating or retrofitting.

Type Light quality Installation Best for
LED strip Continuous and even when well diffused Cut to length, needs a driver and a channel for a clean finish New kitchens and renovations where you want a seamless look
Puck lights Round pools of light, can leave gaps between Easy to surface-mount, spacing matters Display shelves, glass cabinets and accent lighting
Bar / linear fixtures Even along the length of each bar Plug-in or hardwired, linkable in many designs Quick upgrades and straight cabinet runs

Why choose LED strip for under cabinet lighting?

An LED strip for under cabinet lighting is flexible, can be cut at marked points, and hides easily behind the cabinet front rail. Used with a diffusing channel, it spreads light across the whole counter instead of in dots.

Strip lighting needs a matching driver, so check the strip voltage first (typically 12V or 24V DC) and size the driver with margin. Our LED strip lights guide covers voltage, drivers and channels in detail, and the same wattage-sizing rule applies: keep the connected load at or below about 80% of the driver rating.

Browse the flexible LED lighting collection for strip and related components.

Where should under cabinet lights be placed?

Place the light toward the front of the cabinet underside, not against the wall. A fixture at the front throws light back across the counter and reduces glare and shadows from your own body while you work.

Measure the cabinet run before you buy. Note the length of each section, any gaps between cabinets, and where power is available. Strip can be cut and joined to follow the layout, while bars come in fixed lengths, so a plan on paper avoids short or awkward runs.

  • Mount near the front edge, with a small rail or lip to hide the light source from view.
  • Run the light along most of the cabinet length so the counter is evenly lit.
  • For pucks, space them evenly so the pools of light overlap on the counter.
  • Keep wiring tidy, and hide drivers where they can still be reached for service.

What colour temperature works best under cabinets?

Warm white at 2700K to 3000K suits most homes and flatters wood and warm finishes. Neutral white at 3500K to 4000K gives crisper light for food prep. Pick one colour temperature for the whole kitchen so the under cabinet light matches your other fixtures.

Use a high colour rendering index so food and countertops look natural. Check the product specification for the actual CRI before you buy. If your kitchen also has ceiling lighting, our LED slim pot lights pair well with under cabinet lighting for layered light.

How do you power and control under cabinet lights?

There are three common approaches. Plug-in bars use a standard outlet and are the simplest. Hardwired systems connect to a switch or dimmer and give a cleaner look. Strip systems use a low-voltage driver, which can be hidden in a cabinet or nearby space.

If you want dimming, match the driver and the dimmer type. A mismatch is a frequent cause of flicker. Any new line-voltage wiring should be done by a licensed electrician, and you should check your local code and inspector for requirements.

What mistakes should you avoid?

  1. Mounting the light against the back wall, which causes glare on glossy backsplashes.
  2. Mixing different colour temperatures in the same kitchen.
  3. Choosing a driver that is too small for the strip length.
  4. Skipping a diffuser on strip, which can show individual LED dots on the counter.
  5. Leaving no access to the driver for future service.

Planning a multi-unit or renovation project? Our LED lighting supply in Edmonton page explains how we support contractors, including contractor accounts with Net 30 terms, subject to approval.

Frequently asked questions

Is LED strip or puck lighting better under cabinets?

LED strip is usually better for even, continuous light on the counter. Puck lights work well for accent lighting and for retrofit jobs where a strip would be hard to install.

What colour temperature is best for under cabinet lighting?

Most kitchens suit 2700K to 3000K warm white. If you prefer a crisper look for food prep, 3500K to 4000K is a common choice. Match your other kitchen lighting.

Do under cabinet LED strips need a driver?

Yes. LED strip normally runs on 12V or 24V DC, so it needs a driver that converts line voltage to the correct low voltage. Size the driver for the total strip wattage with some margin.

Can under cabinet lights be dimmed?

Yes, if the lights and the driver are dimmable and you use a compatible dimmer or controller. Check compatibility before installing to avoid flicker.

Do I need an electrician to install under cabinet lighting?

Plug-in options need no wiring. Any hardwired connection to line voltage should be done by a licensed electrician. Check your local code and inspector for your project.

Need help matching components or pricing a project? Contact the LitesGo team or call (587) 701-5969. We are at 4914 89 St NW, Edmonton, AB T6E 5K1, and in-stock items usually dispatch in 1-2 business days anywhere in Canada.