Gym and Arena LED Lighting: High Bays, Sports Lights and Layout

School gymnasium lit by LED high bay lights

Most school gyms and community halls use LED high bays, either UFO or linear, with wire guards where balls can hit them. Larger rinks, arenas and fields with very high mounting heights or long throws often use sport or stadium lights instead. The right choice depends on mounting height, room size and how evenly the playing surface needs to be lit.

How is a school gym different from a rink or arena?

A school gym usually has a moderate ceiling, a rectangular floor and several uses, from basketball to assemblies. A rink or arena is larger, has a higher roof or longer throw distances, and often needs stronger, more precisely aimed light.

Gyms often rely on a grid of high bays spread across the ceiling. Large arenas and outdoor fields commonly use fewer, higher-output sport lights mounted on trusses, walls or poles and aimed at the playing surface.

When should you choose high bays and when sport lights?

Factor High bay Sport or stadium light
Typical use School gyms, community halls, warehouses Arenas, large halls, fields, courts
Mounting Ceiling grid, suspended or surface Trusses, walls, poles, with aiming brackets
Light spread Spread across the floor from above Aimed, directional beam
Power range in our catalogue About 40W to 450W, depending on type 400W to 1200W

A gym with a normal ceiling is usually a high bay job. A very high roof or a long throw distance points toward sport lights. A photometric layout can confirm either choice before you buy.

Which LED high bays suit a gym?

UFO high bays are round and give even light from above. Linear high bays are long and suit rectangular rooms and rows. Our guide on linear vs UFO high bays covers the differences. Browse all LED high bay lights.

Examples from our catalogue, with specs taken from product titles:

  • Technilight Premium 150W UFO LED High Bay, 100-150W, 22,500 lm, 120-347V.
  • Technilight Premium 240W UFO LED High Bay, 150-240W, 36,000 lm, 120-347V.
  • Technilight 150W and 240W UFO high bays with a 120° wide beam.
  • Votatec UFO high bays with an adjustable 60/80/100° beam, 150W and 240W models.
  • Votatec 240W LED UFO High Bay, 180-240W, 35,000 lm, IK08.
  • Technilight 4' Flat Linear LED High Bay, 160-320W, 48,000 lm, 120-347V.
  • Technilight Low Glare LED High Bay models in several wattages.

For beam choices, see UFO high bay beam angles explained. A wider beam spreads light across more floor, while a narrower one suits taller mounting.

Which sport and stadium lights does LitesGo carry?

LitesGo carries sport and stadium lights from Technilight and Votatec. Technilight sport lights are listed at 5000K, from 400W up to 1200W. One example is the Technilight 500W LED Sport Light, 70,000 lm, 45° beam, 120-347V. Votatec lists 600W and 1200W LED stadium lights at 5000K.

Check each product page for the beam angle, voltage and mounting options before you order.

Do gym lights need wire guards?

In gyms, balls hit ceiling fixtures. A wire guard, also called a protective grid, keeps the lens or reflector from direct impact. Some fixtures also list an impact rating, such as IK08 on one Votatec UFO model, but a guard adds a further layer of protection.

LitesGo lists Technilight protective wire guards for Premium UFO high bays, in sizes for 100-150W and 150-240W models. We also list 2' and 4' protective grids for Technilight linear high bays. Because each guard fits specific fixtures, match the guard to the model. Browse the high bay accessories collection, which also includes reflectors, brackets, sensors and emergency battery backups.

How do you plan a gym or arena layout?

Fixture count and spacing depend on the floor size, mounting height, beam angle and the light level you need. A rough count can mislead, so ask for a photometric layout before you order a large project.

  1. Measure the floor, the mounting height and any obstructions such as trusses or ducts.
  2. Decide how the room will be used, from recreation to competition, and confirm any level or standard your facility or league requires.
  3. Choose a candidate fixture and beam angle.
  4. Run a photometric layout to check spacing and evenness.
  5. Add controls, emergency backup and guards as needed.

LitesGo provides free DIALux and AGi32 photometric layouts for Technilight fixtures. See our free photometric simulation page to request one.

What should you check before ordering?

  • Voltage, 120V or 347V, and compatible dimming or sensors.
  • Mounting method, for example suspended, surface or aimed from a truss.
  • Wire guards for fixtures in ball areas.
  • Emergency lighting and exit requirements, checked against the Canadian Electrical Code and your local authority having jurisdiction (inspector).
  • Delivery timing. Contractor accounts with Net 30 terms are available, subject to approval.

Frequently asked questions

What is the best LED light for a school gym?

Most school gyms use UFO or linear LED high bays with a wire guard in ball areas. Choose the beam angle and wattage for your ceiling height, and confirm the layout with a photometric plan.

What is the difference between a high bay and a sport light?

A high bay is mounted overhead and spreads light across the floor. A sport or stadium light is a higher-output fixture that is aimed, and is often used in arenas, large halls and fields.

Do I need wire guards on gym lights?

Wire guards are common in gyms where balls can hit fixtures. We list Technilight wire guards for Premium UFO high bays and protective grids for Technilight linear high bays.

Can LitesGo provide a lighting layout for my gym?

Yes. We provide free DIALux and AGi32 photometric layouts for Technilight fixtures. Contact us with your floor size, mounting height and use.

What colour temperature is used in sport lighting?

Our Technilight sport lights are listed at 5000K, and Votatec stadium lights are also listed at 5000K. Many high bays offer selectable colour temperatures, so check each product page.

Need help choosing fixtures or pricing a gym or arena project? Contact the LitesGo team or call (587) 701-5969. We are at 4914 89 St NW, Edmonton, AB T6E 5K1, and in-stock items usually dispatch in 1-2 business days anywhere in Canada.