The right LED high bay wattage depends on mounting height, the light level the space needs and the fixture's efficiency. As a rough starting point, lower ceilings often use fixtures around 100-150W, mid-height spaces 150-240W, and tall spaces 240W and up. Treat these as starting points and confirm with a photometric layout.
Why is lumens a better measure than watts?
Watts measure the power a fixture draws. Lumens measure the light it produces. Two 150W fixtures can give different amounts of light if one is more efficient, so compare lumens first and watts second.
Our product titles show this clearly. Several 150W UFO models list 22,500 lm, which works out to about 150 lumens per watt at full power. A 240W model lists 36,000 lm. Some NEXLEDS titles list 140 lm/W. Not every title lists lumens, so check each product page.
What wattage do LitesGo UFO high bays come in?
We group our UFO high bay lights into three wattage collections. Many fixtures have selectable wattage, so one model can cover more than one output level.
| Collection |
Examples from product titles |
| 150W LED UFO high bays |
Votatec 150W, 80-150W, 22,500 lm; Technilight Premium 150W, 100-150W, 22,500 lm; NEXLEDS 150W, 100/120/150W selectable |
| 200-240W LED UFO high bays |
Votatec 240W, 180-240W, 35,000 lm; Technilight Premium 240W, 150-240W, 36,000 lm; NEXLEDS 240W, 150/200/240W selectable |
| 300W+ LED UFO high bays |
Votatec 300W, 240-300W, 44,400 lm; Technilight UFO 200-300W models; Technilight 300-500W models |
Selectable wattage is useful on a project where the final light level is still being decided. Pick the model whose top output covers the high case, then dial it down if the layout allows.
How does ceiling height affect wattage?
The higher the fixture, the more light it needs to deliver the same level at the floor, because light spreads and weakens with distance. These are general starting points, stated cautiously. Real results depend on the optics, spacing and reflectance of the room.
| Mounting height |
Common starting wattage class |
Collection to browse |
| Lower, up to about 20 ft |
Around 100-150W |
150W UFO |
| Mid, about 20-30 ft |
Around 150-240W |
200-240W UFO |
| Tall, over about 30 ft |
Around 240-300W or more |
300W+ UFO |
Beam angle matters as well. A narrower beam puts more light on the floor from a tall mount, and a wider beam suits lower ceilings. Our UFO beam angle guide explains how to choose.
How does the type of space change the answer?
Different tasks need different light levels, and the owner or designer should set the target. In general:
-
Bulk storage and open warehouse floors: moderate, even light is usually enough.
-
Racking aisles: the light has to reach the vertical faces of the racks, so spacing and optics matter more than raw wattage. Linear fixtures over the aisle often help.
-
Workshops, production and auto shops: task areas usually need higher light levels and good uniformity.
-
Gyms and sports halls: glare control and even light matter, and the ceiling is often high.
-
Washdown or dusty areas: choose a suitable ingress rating first, then size the wattage.
For the choice between linear and round fixtures, read our linear vs UFO high bay guide.
What wattage do flat linear high bays offer?
Our linear high bay lights cover a wide span. Examples from product titles include a Technilight 2' flat linear at 40-80W, 12,000 lm, a 2' at 110-220W, 33,000 lm, a 4' at 160-320W, 48,000 lm, and a 4' at 320-450W, 67,500 lm. Votatec and NEXLEDS offer selectable-wattage linear models as well.
Lower wattages suit lower ceilings and aisle lighting, and the highest wattages suit tall, demanding spaces. Check each product page for specifications.
How do you estimate how many fixtures you need?
A simple estimate is the target light level times the floor area, divided by the lumens each fixture delivers after losses. The result is a rough count only, because it ignores the beam shape, spacing and how much light reaches the work plane.
- Decide the target light level for the space.
- Measure the floor area and the mounting height.
- Choose a fixture and note its lumens.
- Estimate the count, then check that the spacing is sensible for the mounting height.
- Confirm with a photometric layout before you order.
For a wider overview of fixture choice, see our warehouse high bay guide.
Why get a photometric layout before ordering?
A layout uses the fixture's real light distribution data to show light levels across your floor plan. It tells you how many fixtures you need, where they should go and whether a lower wattage would do, so you avoid over-buying or leaving dark spots.
It is especially valuable on larger buildings, tall ceilings, racking layouts and any project with a specified light level. We offer free DIALux and AGi32 photometric layouts for Technilight fixtures. Send us the floor plan, ceiling height and target light level, or learn more on our free photometric simulation page.
Frequently asked questions
What wattage LED high bay replaces a 400W metal halide?
There is no single answer, because it depends on the fixture's lumens, the mounting height and the light level you need. Compare lumens, not watts, and use a photometric layout to confirm.
Is a higher wattage high bay always better?
No. Higher wattage can mean more light than needed, glare and wasted cost. Choose the output the layout calls for, and use selectable wattage to fine-tune it.
Does selectable wattage help?
Yes. Many of our UFO and linear high bays list a wattage range, so one model can be set to different output levels as the layout and needs change.
How many lumens per watt do your high bays give?
It varies by model. Several 150W UFO titles list 22,500 lm, and some NEXLEDS titles list 140 lm/W. Check each product page for the exact figures.
Can you size a high bay layout for my building?
For Technilight fixtures we provide free DIALux and AGi32 layouts. Send us the floor plan, ceiling height and target light level.
Need help choosing a wattage? Contact the LitesGo team or call (587) 701-5969. We are at 4914 89 St NW, Edmonton, AB T6E 5K1, and in-stock items usually dispatch in 1-2 business days anywhere in Canada.