A common guideline is to mount indoor wall sconces so the centre of the fixture sits about 60 to 66 inches above the floor in hallways and living rooms. Along a hallway, space them roughly 8 to 10 feet apart. These are design rules of thumb, not code requirements, so confirm the box locations with your electrician.
How high should a wall sconce be mounted?
In hallways, entries and living rooms, a common guideline is about 60 to 66 inches from the floor to the centre of the sconce. That puts the light near eye level for most adults, so the bulb or diffuser is not a source of glare.
Adjust for the fixture and the room:
- Tall fixtures, such as the Dainolite Abii 15" Tall Wall Sconce, look balanced when the centre of the fixture, not the top or bottom, sits at the target height.
- Fixtures with exposed bulbs are best kept a little above eye level to reduce glare.
- On a staircase, mount the sconces at a consistent height above the stair nosing so they follow the slope.
Browse our Dainolite wall sconces and indoor wall sconces to compare sizes.
How far apart should wall sconces be in a hallway?
A common guideline is about 8 to 10 feet between sconces along a hallway, with the first and last sconce roughly a third of that distance from the ends. In a short hall, one pair facing each other, or a single sconce, may be enough.
| Hallway length |
Typical approach (guideline) |
| Under about 8 ft |
One sconce, or a pair opposite each other |
| About 8 to 16 ft |
Two or three sconces along one wall, evenly spaced |
| Over 16 ft |
A sconce every 8 to 10 ft, or sconces on both walls staggered |
Sconces on their own may not light a hallway evenly. Many designers combine them with a ceiling fixture or pot lights. See our pot light calculator to plan the ceiling lights.
Where should sconces go beside a bathroom mirror?
Sconces on both sides of a mirror give even light on the face with fewer shadows than a single light above. A common guideline is to mount the pair at about eye level, around 60 to 66 inches to the centre, and about 28 to 36 inches apart so the light falls on the face. Check the mirror width and fixture size, and follow the manufacturer's instructions for any wet-location rating.
Our bathroom vanity light guide covers size, height and colour temperature for vanity lighting in more detail.
Where should wall sconces go beside a bed?
Bedside sconces free up space on night tables and put the light at reading height. A common guideline is to mount the centre of the sconce about 12 to 20 inches above the mattress top, or around 52 to 60 inches from the floor, depending on the bed height and the style. Place them about 6 to 8 inches out from each side of the headboard or about 24 to 30 inches from the centre of the bed.
Dimmable LED or lamps are useful in a bedroom. Check that the dimmer type suits the fixture, and see our LED dimmer compatibility guide.
What are up/down sconces and where do they work?
An up/down sconce sends light both toward the ceiling and the floor. It makes a wash of light on the wall and can suit a hallway or an entry. The effect is most noticeable on plain, light-coloured walls.
Many up/down sconces in our range are designed for outdoor use, so check the product page for the rating before you use one indoors. See the up/down wall sconces collection for the current range, and our outdoor wall lights guide for outdoor placement.
Should I choose plug-in or hardwired sconces?
Hardwired sconces connect to the building wiring through a wall box. They look clean and are controlled by a wall switch, but the wiring needs to be in place or installed by a licensed electrician. Plug-in sconces connect to a regular receptacle, which can make them practical in rentals or where a new box is hard to add.
| Type |
Advantages |
Things to check |
| Hardwired |
Clean look, wall switch control |
Box location and wiring by a licensed electrician |
| Plug-in |
No new wiring, easy to move |
Cord routing and receptacle location |
Plug-in options exist in our range. One example is the Dainolite Valemont 10" Plug-In Wall Sconce, 40W max, Matte Black. Check each product page to confirm whether a sconce is plug-in or hardwired.
What should contractors check before roughing in?
- Decide the sconce height and spacing before the boxes are set, and mark them on the wall.
- Check the fixture's backplate size and mounting method against the box.
- Confirm the box location with your electrician, and check the Canadian Electrical Code and your local authority having jurisdiction (inspector).
- Confirm voltage, lamp type and dimming.
LitesGo is an authorized Dainolite dealer. Dainolite orders over $2,500 ship free in Canada, and orders under $2,500 carry an $85 drop-ship fee.
Frequently asked questions
How high should a wall sconce be in a hallway?
A common guideline is about 60 to 66 inches from the floor to the centre of the sconce. Adjust for the fixture's size and glare.
How far apart should hallway sconces be?
A common guideline is roughly 8 to 10 feet apart. Short halls may need only one sconce or a pair.
How high should sconces be on each side of a bathroom mirror?
Many designers mount them at about eye level, around 60 to 66 inches to the centre, on both sides of the mirror. Follow the manufacturer's instructions for wet-location use.
Can I use a plug-in sconce instead of hardwiring?
Yes, if the product is designed as a plug-in sconce. It connects to a normal receptacle, so no new box is needed. Check the product page to confirm the type.
Who should confirm the box location for a sconce?
A licensed electrician. Also check the Canadian Electrical Code and your local authority having jurisdiction (inspector) for requirements.
Need help choosing fixtures for a home or project? Contact the LitesGo team or call (587) 701-5969. We are at 4914 89 St NW, Edmonton, AB T6E 5K1, and in-stock items usually dispatch in 1-2 business days anywhere in Canada.